Cyclodextrins Initiated Ring-Opening Polymerization of Lactide Using 4-Dimethylaminopyridine (DMAP) as Catalyst: Study of DMAP/ß-CD Inclusion Complex and Access to New Structures.

Cyclodextrins (CDs) are cyclic oligosaccharides used in many fields. Grafting polymers onto CDs enables new structures and applications to be obtained. Polylactide (PLA) is a biobased, biocompatible aliphatic polyester that can be grafted onto CDs by -OH-initiated ring-opening polymerization. Using 4-dimethylaminopyridine (DMAP) as an organocatalyst, a quantitative functionalization is reached on native α-, ß-, γ- and 2,3-dimethyl- ß-cyclodextrins. Narrow molecular weight distributions are obtained with the native CDs (dispersity < 1.1). The DMAP/ß-CD combination is used as a case study, and the formation of an inclusion complex (1/1) is shown for the first time in the literature, which is fully characterized by NMR. The inclusion of DMAP into the cavity occurs via the secondary rim of the ß-CD and the association constant (Ka) is estimated to be 88.2 M-1. Its use as an initiator for ring-opening polymerization leads to a partial functionalization efficiency, and thus a more hydrophilic ß-CD-PLA conjugate than that obtained starting from native ß-CD. Polymerization results including also the use of the adamantane/ß-CD inclusion complex as an initiator suggest that inclusion of the DMAP catalyst into the CD may not occur during polymerization reactions. Rac-lactide does not form an inclusion complex with ß-CD.

Lactide Lactone Chain Shuttling Copolymerization Mediated by an Aminobisphenolate Supported Aluminum Complex and Al(OiPr)3: Access to New Polylactide Based Block Copolymers.

The chain shuttling ring-opening copolymerization of l-lactide with ε-caprolactone has been achieved using two aluminum catalysts presenting different selectivities and benzyl alcohol as chain transfer agent. A newly synthesized aminobisphenolate supported aluminum complex affords the synthesis of lactone rich poly(l-lactide-co-lactone) statistical copolymeric blocks, while Al(OiPr)3 produces semicrystalline poly(l-lactide) rich blocks. Transalkoxylation is shown to operate efficiently. The crystalline ratios and glass transition temperatures of these new classes of polylactide based block copolymers can be tuned by adjusting the catalysts and the comonomers ratio.

A one pot one step combined radical and ring-opening route for the dual functionalization of starch in aqueous medium.

Starch based materials are attractive bio-based alternative to fully synthetic polymers. Native starch has however limited thermoprocessability and properties and must be modified. In order to improve the properties of starch-graft-poly(butyl-acrylate-co-styrene) copolymers via a process as green as possible, we report herein a new method for the dual functionalization of the polysaccharide via a one pot one step reaction in aqueous medium combining free radical polymerizations and ring-opening chemistry. Poly(butyl acrylate) or poly(butyl acrylate-co-styrene) (ca. 60 000 g/mol) and oligo(ε-caprolactone) were grafted on starch with a grafting percentage up to 75 %. The copolymers show two glass transition temperatures: one around 55-60 °C related to starch and a second attributed to the grafted vinyl polymers, from -46 °C to 20 °C depending on butyl acrylate/styrene ratio. The resulting dual functionalized materials exhibit excellent mechanical properties, with elongation at break in the range 20-210 %, while single functionalized starch shows less than 5 %.

Enzymatic Polycondensation of 1,6-Hexanediol and Diethyl Adipate: A Statistical Approach Predicting the Key-Parameters in Solution and in Bulk.

Among the various catalysts that can be used for polycondensation reactions, enzymes have been gaining interest for three decades, offering a green and eco-friendly platform towards the sustainable design of renewable polyesters. However, limitations imposed by their delicate nature, render them less addressed. As a case study, we compare herein bulk and solution polycondensation of 1,6-hexanediol and diethyl adipate catalyzed by an immobilized lipase from Candida antarctica. The influence of various parameters including time, temperature, enzyme loading, and vacuum was assessed in the frame of a two-step polymerization with the help of response surface methodology, a statistical technique that investigates relations between input and output variables. Results in solution (diphenyl ether) and bulk conditions showed that a two-hour reaction time was enough to allow adequate oligomer growth for the first step conducted under atmospheric pressure at 100 °C. The number-average molecular weight (Mn) achieved varied between 5000 and 12,000 g·mol-1 after a 24 h reaction and up to 18,500 g∙mol-1 after 48 h. The statistical analysis showed that vacuum was the most influential factor affecting the Mn in diphenyl ether. In sharp contrast, enzyme loading was found to be the most influential parameter in bulk conditions. Recyclability in bulk conditions showed a constant Mn of the polyester over three cycles, while a 17% decrease was noticed in solution. The following work finally introduced a statistical approach that can adequately predict the Mn of poly(hexylene adipate) based on the choice of parameter levels, providing a handy tool in the synthesis of polyesters where the control of molecular weight is of importance.